Werner SCAFFOLD TOWERS

Simplified ordering -- order one model number and receive everything needed to build a complete tower.
Tower Series Load
Capacity/sq. ft.
Load Capacity/Deck Load Capacity/Scaffold Platform Width Platform Length Platform Height
4100 25 lbs. 500 lbs. 500 lbs. 29" 6', 8' or 10' 12', 17' 6" or 23'
4200 25 lbs. 500 lbs. 1000 lbs. 4-1/2' 6', 8' or 10' 12', 17'6", 23'
28', 34' or 39'
Includes outriggers Includes outriggers on all models except: 4201-12K, 4202-12K, 4203-12K (These models meet the ANSI code).
NOTICE-ALL SCAFFOLDS: Maximum scaffold platform height is equal to 4x the smaller base section dimension of the scaffold or installed outrigger in most states except California which requires 3x. Check state and local codes.
Swedge-Master® Scaffold Joint Process
 • Provides consistently strong and tight internal and eternal joints.
 • Allows easier inspection than welded joints.
 • Standard on all scaffold connections.

Swedge-Master® Scaffold Joint Process
 • Spring-loaded hook snaps on easily.
 • Releases manually.
 • Goes 3/4 on the way around the brace it hooks onto for increased stability.
Swedge Master
Interlock Pin Assembly
 • Steel pin secures upper and lower sections.
 • Spring steel clip keeps pin with scaffold.
 • Easy-to-use thumb tab engaging/disengaging pin.
 • Frame has storage hole for locating pin assembly
   (when not in use).
Interlocking Pin Assembly
Snap-Up Locking Mechanism
 • Automatically locks when fully extended;
   easily unlocks by pushing on thumb release.
 • Corrosion-resistan "elbow latches".
Locking Mechanism
Adjustable Locking Leg
 • Provides quick and easy adjustament up to 12".
 • Standard on all narrow and wide span base sections.
Adjustable Locking leg
5" Ball Bearing Non Marring Caster with 2-Way Lock
 • 2 way lock prevents rolling and swiveling.
 • Caster is rust resistant.
Caster with 2-Way Lock
Basic Scaffold Terminology

Scaffold Towers

Spacer Narrow Span (29" wide) Towers Spacer Wide Span (4-1/2' wide) Towers

Platform Length

6' Long 8' Long 10' Long 6' Long 8' Long 10' Long
Component
Model No.
Description 4101-12 4101-18 4101-23 41021-12 4102-18 4102-23 4103-12 4103-18 4103-23 4201-12 4201-18 4201-23 4202-12 4202-18 4202-23 4203-12 4203-18 4203-23
FNB-80 Adjustable Base
End Frame
2 2 2 2 2 2 2 2 2
FNU-65 5-1/2' Upper End Frame 2 4 6 2 4 6 2 4 6
FNG-42 Guard Rail
End Frame
2 2 2 2 2 2 2 2 2
FWB-80 Adjustable Base End Frame 2 2 2 2 2 2 2 2 2
FWU-65 5-1/2' Upper End Frame 2 4 6 2 4 6 2 4 6
FWG-42 Guard Rail
End Frame
2 2 2 2 2 2 2 2 2
PD22W-6 Scaffold Board
with Access Door
1 1 2 1 1 2
PD22W-8 1 1 2 1 1 2
PD22W-10 1 1 2 1 1 2
P22W-6 Scaffold
Board
1 1 2
P22W-8 1 1 2
P22W-10 1 1 2
BH-6 Horizontal Brace 8 10 12 8 10 12
BH-8 8 10 12 8 10 12
BH-10 8 10 12 8 10 12
BD-6 Diagonal
Brace
5 7 9 9 13 17
BD-8 5 7 9 9 13 17
BD-10 5 7 9 9 13 17
BN-6 Horizontal-Diagonal 2 2 4
BN-8 2 2 4
BN-10 2 2 4
BW-6 Horizontal-Diagonal 2 2 4
BW-8 2 2 4
BW-10 2 2 4
OR-ADU Knee Type
Outrigger
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
TN4A-6U Toe Board 1 1 2
TN4A-8U 1 1 2
TN4A-10U 1 1 2
TW4A-6U
Toe Board 1 1 2
TW4A-8U 1 1 2
TW4A-10U 1 1 2
Rolling Outriggers Option Rolling Outriggers Option
FRO Outrigger 4 4 4 4 4 4 4 4 4
BOR-N Outrigger Brace 4 4 4 4 4 4 4 4 4
FRO Outrigger 4 4 4 4 4 4
BOR-W Outrigger Brace 4 4 4 4 4 4

There are no products to list in this category.



Werner Logo
Credit Cards SSL Secure Seal

Illustrations are representative and may not include all styles. Third-party marks and logos are registered trademarks of their respective owners. All rights reserved.

Steel Access Ladders